Hello,
please, can anyone help me?
We have configured policy for backup Active Directory server, that randomly ends with status (1) - partially successful.
Policy type is MS-Windows with BMR and Granular recovery enabled. Target storage is SLP (AdvancedDisk and then duplicate to tape)
Backup server and client are Windows Server 2008 R2, Netbackup 7.6.0.3
Part of Job status log:
10/13/2014 6:00:38 PM - Info bptm(pid=10336) start backup
10/13/2014 6:00:38 PM - Info bptm(pid=10336) backup child process is pid 11280.10488
10/13/2014 6:00:38 PM - Info bptm(pid=11280) start
10/13/2014 6:00:38 PM - begin writing
10/13/2014 6:00:39 PM - Info bpbkar32(pid=3608) change time comparison:<disabled>
10/13/2014 6:00:39 PM - Info bpbkar32(pid=3608) archive bit processing:<enabled>
10/13/2014 6:00:51 PM - Info bpbkar32(pid=3608) not using change journal data for <C:\>: not enabled
10/13/2014 6:45:51 PM - Error bpbrm(pid=3676) from client <client_name>: ERR - unable to write to pdi device
10/13/2014 6:45:51 PM - Error bpbrm(pid=3676) from client <client_name>: ERR - Active directory granular restore from this image may not work.
10/13/2014 7:35:03 PM - Info bpbrm(pid=3676) from client <client_name>: TRV - Starting granular backup processing for (System State\Active Directory). This may take a while...
10/13/2014 7:40:33 PM - Info bpbrm(pid=3676) from client <client_name>: TRV - Successfully finished granular backup processing for (System State\Active Directory).
10/13/2014 7:46:12 PM - Info bptm(pid=10336) waited for full buffer 264752 times, delayed 413889 times
10/13/2014 7:46:23 PM - Info bptm(pid=10336) EXITING with status 0 <----------
10/13/2014 7:46:23 PM - Info bpbrm(pid=3676) validating image for client <client_name>
10/13/2014 7:46:27 PM - Info bpbkar32(pid=3608) done. status: 1: the requested operation was partially successful
10/13/2014 7:46:27 PM - end writing; write time: 1:45:49
the requested operation was partially successful(1)
In bpkar log on client I found many of these entries in time of backup:
[3328.1696] <2> ov_log::V_GlobalLog: ERR - raiPdiWrite():unable to write to object
Thanks for any help/tip
Regards
Martin