We are taking our first crack at setting up an MS-Exchange-Server policy.
We are running NBU 7.6.0.3 (same version on all master and media servers).
I have set up a policy and have it going to the disk storage unit.
I have included the two mailbox hosts (I will call them exmb1 and exmb2) in the Clients list.
In the Backup Selections I have "Microsoft Exchange Database Availability Groups:\" (with no quotes).
We have Enable granular recovery checked and would like to use that here.
In the Host Properties for the clients (two Exchange mailbox hosts), we have set up the credentials and had them accepted.
We have also set up a granular proxy host.
I think that we need to set up an IP for the DAG--we have not yet done this.
The current exit status is (2): none of the requested files were backed up. Here is the output from a job:
10/16/2014 08:06:52 - Info nbjm (pid=16155) starting backup job (jobid=945309) for client rchexmbp2, policy exchange_test, schedule test_full
10/16/2014 08:06:52 - Info nbjm (pid=16155) requesting MEDIA_SERVER_ONLY resources from RB for backup job (jobid=945309, request id:{4BC658DE-5535-11E4-861A-439834559B48})
10/16/2014 08:06:52 - requesting resource rtxdxip01-stg-itg
10/16/2014 08:06:52 - requesting resource kronos.NBU_CLIENT.MAXJOBS.rchexmbp2
10/16/2014 08:06:52 - requesting resource kronos.NBU_POLICY.MAXJOBS.exchange_test
10/16/2014 08:06:52 - requesting resource EXCHANGE_RESOLVER.kronos.exchange_test.rchexmbp2
10/16/2014 08:06:52 - granted resource kronos.NBU_CLIENT.MAXJOBS.rchexmbp2
10/16/2014 08:06:52 - granted resource kronos.NBU_POLICY.MAXJOBS.exchange_test
10/16/2014 08:06:52 - granted resource EXCHANGE_RESOLVER.kronos.exchange_test.rchexmbp2
10/16/2014 08:06:52 - estimated 0 kbytes needed
10/16/2014 08:06:52 - begin Parent Job
10/16/2014 08:06:52 - Info RUNCMD (pid=30271) started
10/16/2014 08:06:52 - Info RUNCMD (pid=30271) exiting with status: 0
Operation Status: 0
10/16/2014 08:06:52 - end Parent Job; elapsed time 0:00:00
Operation Status: 0
Operation Status: 0
10/16/2014 08:06:52 - started process bpbrm (pid=30278)
10/16/2014 08:06:53 - Info bpbrm (pid=30278) rchexmbp2 is the host to restore to
10/16/2014 08:06:53 - Info bpbrm (pid=30278) reading file list for client
10/16/2014 08:06:55 - Info bpbrm (pid=30278) client_pid=21744
10/16/2014 08:06:55 - Info bpbrm (pid=30278) from client rchexmbp2: TRV - BPRESOLVER has executed on server (RCHEXMBP2)
10/16/2014 08:07:04 - Info bpresolver (pid=21744) done. status: 2
10/16/2014 08:07:04 - Error bpbrm (pid=30278) no worklist items returned from bpresolver on client rchexmbp2
10/16/2014 08:07:04 - Info bpresolver (pid=21744) done. status: 2: none of the requested files were backed up
Operation Status: 2
Operation Status: 0
10/16/2014 08:07:04 - Info RUNCMD (pid=30311) started
10/16/2014 08:07:04 - Info RUNCMD (pid=30311) exiting with status: 0
Operation Status: 0
Operation Status: 2
none of the requested files were backed up (2)
I know this is really basic for some folks, but this is the first time we have set this up... any help in getting this running would be appreciated.
Side note: I would really like to back up just one of the DAG's databases as a test if possible (I will call them exdb1, exdb2, exdb3, exdb4) before going for the whole enchilada.
Thanks in advance!