Two robots attached to Master/Media server
OS Solaris 10
NBU 6.5.3
Problem began when the tape storage unit froze up and had to be powered cycled. POST runs without errors.
No faults on the tape storage unit.
The Quantum storage unit supports two configurations one with five tape drives and the other with four.
Media and Device Configuration wizard shows:
Configuration TLD(0) five drives
TLD(1) four drives
The new device scans shows:
TLD(0) fives drives listed as (attached to remote host)
Properties for the attached to remote host drives show as "Drive address already occupied by a drive"
TLD(1) four drives and lists them as shared
- sgscan only shows the four drives on TLD(1) and nothing for TLD(0)
Documentation shows the original configuration as:
TLD(0) /dev/sg/c5t0|1
TLD(1) /dev/sg/c5t0|2
Now shows
TLD(0) /dev/sg/c4t0|6
TLD(1) /dev/sg/c4t0|1
Tried to change the paths. All paths are found but could not be changed.
Also the drives are configured as HCART instead of HCART2 and the drive type field is blank so even the drives it finds are non-operational.
Deleted all drives and reconfigured - no change
Deleted drives and robots and reconfigured - no change
Any ideas?
Thanks in advance