Hello,
My backup failed with the status code 2009. I've read a lot of article on this forum or google but I can't fix my problem.
I followed the tasks describe in the technote :177800 but the problem still present.
I looked into the messages log file and I can see the following:
ar 2 15:23:08 SAVE Error for Command: read Error Level: Fatal
Mar 2 15:23:08 SAVE scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Mar 2 15:23:08 SAVE scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: ,
Mar 2 15:23:08 SAVE scsi: [ID 107833 kern.notice] Sense Key: Media Error
Mar 2 15:23:08 SAVE scsi: [ID 107833 kern.notice] ASC: 0x11 (unrecovered read error), ASCQ: 0x0, FRU: 0x0
Mar 2 15:23:59 SAVE scsi: [ID 107833 kern.warning] WARNING: /pci@1f,700000/pci@0/scsi@2/st@4,0 (st0):
Mar 2 15:23:59 SAVE Error for Command: release Error Level: Fatal
Mar 2 15:23:59 SAVE scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Mar 2 15:23:59 SAVE scsi: [ID 107833 kern.notice] Vendor: HP Serial Number: ,
Mar 2 15:23:59 SAVE scsi: [ID 107833 kern.notice] Sense Key: Unit Attention
Mar 2 15:23:59 SAVE scsi: [ID 107833 kern.notice] ASC: 0x2a (mode parameters changed), ASCQ: 0x1, FRU: 0x0
Mar 2 15:23:59 SAVE avrd[779]: [ID 626613 daemon.error] cannot determine ring status on tape_drive1hcart3 (device 0, /dev/rmt/0cbn), received errno 5 on second open
Someone can help me to understand this message?
Thanks in advance.