Master server running Windows Server 2008
NetApp filer ONTAP 8.1
We just received our license for ndmp support and am in the process of configure for NetApp filer.
License installed - No Problems
When a backup policy is run I receive the following:
------------------------------------------------------------------
3/16/2015 3:31:55 PM - Info nbjm(pid=5172) starting backup job (jobid=1049) for client NAFILER, policy VolData-Backup, schedule Weekly
3/16/2015 3:31:55 PM - Info nbjm(pid=5172) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=1049, request id:{FC00FD2C-7B30-4B09-8759-9506A4560F1E})
3/16/2015 3:31:55 PM - requesting resource MasterServer-hcart2-robot-tld-0
3/16/2015 3:31:55 PM - requesting resource MasterServer.NBU_CLIENT.MAXJOBS.NAFILER
3/16/2015 3:31:55 PM - requesting resource MasterServer.NBU_POLICY.MAXJOBS.NAFILER-VolData
3/16/2015 3:31:55 PM - granted resource MasterServer.NBU_CLIENT.MAXJOBS.NAFILER
3/16/2015 3:31:55 PM - granted resource MasterServer.NBU_POLICY.MAXJOBS.NAFILER-VolData
3/16/2015 3:31:55 PM - granted resource CART001
3/16/2015 3:31:55 PM - granted resource IBM.ULTRIUM-TD4.005
3/16/2015 3:31:55 PM - granted resource MasterServer-hcart2-robot-tld-0
3/16/2015 3:31:55 PM - estimated 0 Kbytes needed
3/16/2015 3:31:55 PM - Info nbjm(pid=5172) started backup (backupid=NAFILER_1426534315) job for client NAFILER, policy NAFILER-VolData, schedule Weekly on storage unit MasterServer-hcart2-robot-tld-0
3/16/2015 3:31:56 PM - started process bpbrm (8860)
3/16/2015 3:32:23 PM - Info bpbrm(pid=8860) connect failed STATUS (18) CONNECT_FAILED
3/16/2015 3:32:23 PM - Info bpbrm(pid=8860) status: FAILED, (42) CONNECT_REFUSED; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO NAFILER 120.60.30.01 bpcd VIA pbx
3/16/2015 3:32:23 PM - Info bpbrm(pid=8860) status: FAILED, (42) CONNECT_REFUSED; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO NAFILER 120.60.30.01 bpcd VIA vnetd
3/16/2015 3:32:23 PM - Info bpbrm(pid=8860) status: FAILED, (42) CONNECT_REFUSED; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO NAFILER 120.60.30.01 bpcd
3/16/2015 3:32:23 PM - Error bpbrm(pid=8860) Cannot connect to NAFILER
3/16/2015 3:32:23 PM - Info bpbkar32(pid=0) done. status: 58: can't connect to client
3/16/2015 3:32:23 PM - end writing
---------------------------------------------------------------
Under credentials - NDMP hosts, I have tried to add the NetApp filers but all I get are authentication errors.
Is there a checklist for installation and configuration of NDMP for NetApp filers?
Glen