Hi to all!!!
We recently have adquired a new MSL4048 library (LTO6) to use with netbackup, the media server sees the library without problems, all drives are ok, aparently.
When we try to configure a new or old backup definition to use the new library it takes about a minute to mount a tape, and after some time the drive goes down, We have tried the drive test from NB Gui and it also fails.
Do we have to do something else to configure this library with netbackup?, perhaps We missed something from the documentation (again).
This a log from drive test:
11/12/2015 10:49:30 AM - requesting resource DRIVE07:{3,0,3,0}:NetBackup:__ANY__
11/12/2015 10:49:30 AM - reserving resource DRIVE07:{3,0,3,0}:NetBackup:__ANY__
11/12/2015 10:49:30 AM - reserved resource 000007
11/12/2015 10:49:30 AM - granted resource 000007
11/12/2015 10:49:30 AM - granted resource DRIVE07
11/12/2015 10:49:30 AM - begin
11/12/2015 10:49:32 AM - Info bptm(pid=8032) start
11/12/2015 10:49:32 AM - Info bptm(pid=8032) Waiting for mount of media id 000007 (copy 1) on server sernb03
11/12/2015 10:49:32 AM - mounting 000007
11/12/2015 10:49:32 AM - Info bptm(pid=8032) INF - Waiting for mount of media id 000007 on server sernb03 for reading.
11/12/2015 10:51:16 AM - mounted; mount time: 0:01:44
11/12/2015 10:51:16 AM - Info bptm(pid=8032) EXITING with status 0 <----------
media manager failure(810)
Thanks in advance.